Studi Kasus 2 jarkom




Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname router_fany
router_fany(config)#enable password
% Incomplete command.
router_fany(config)#enable password 123456789
router_fany(config)#interface
% Incomplete command.
router_fany(config)#interface fastEthernet 0/0
router_fany(config-if)#ip address 192.168.10.100 255.255.255.0
router_fany(config-if)#no shutdown

router_fany(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

router_fany(config-if)#exit
router_fany(config)#exit
router_fany#
%SYS-5-CONFIG_I: Configured from console by console

router_fany#write memory
Building configuration...
[OK]
router_fany#
router_fany#

Tidak ada komentar:

Diberdayakan oleh Blogger.